Maytag Oven Error Codes - Stove Range Fault Codes

What does the error code mean on my Maytag oven, range, or stove? If your Maytag Oven is displaying a code on the display, these fault/error code definitions will help you to find and fix the problem by identifying which part is faulty. Be aware that the cause of many of the error codes the Maytag Oven will display is because the timer itself is at fault. The proper name of the timer on your Maytag Oven is called an Electronic Range Control – ERC. We will explain more about the ERC below. If you need any assistance troubleshooting your Maytag Oven, please leave your question below with the model number of your Maytag Oven and the exact error code that is displaying on the Oven’s display.

Maytag Oven Error Codes – Stove Range Fault Codes
Causes and Solutions – How To Fix?

At times, even if the error or fault code indicates a part in the oven is bad or faulty, it may be that the Timer/Electronic Range Control itself is faulty. The Timer may not show the correct error code of the exact problem to pinpoint the issue. This can be confusing in most cases. You can troubleshoot to see if the error code is a Timer issue or a problem with an actual part inside your Oven. If you suspect the timer or ERC to be at fault, you can replace it and the error shouldclear. Pics of the ERC and or control board clock assembly are below…

Maytag Stove Oven Range Electronic Clock Control – ERC

Maytag Range Oven Control Board Clock Assembly – aka ERC

We have the full error code lists for all Maytag Oven/Range/Stoves below for the most common error codes, the error codes for the Maytag Ovens with the clock C and D, and the Maytag Gemini Oven/Range error codes.Check below and find your Maytag Oven model or type and check the error codes in that particular list to find the part that needs to be removed and replaced. Below is a quick reference error code chart for Maytag Oven error codes F0 through F9…

Maytag Oven Range Stove Error Codes Chart

Error Codes For Most Maytag Ovens/Ranges/Stoves:

Maytag Oven Error Code F0
Cause Of Problem: Function key is stuck
What To Replace/Clean/Check: The touch pad OR repair the clock ERC assembly

Maytag Oven Error Code F1
Cause Of Problem: Defective touch pad/membrane/watchdog on board
What To Replace/Clean/Check: Replace touch pad, timer (ERC), membrane. This error is most always the touch pad.

When you have the F1 error – This test determines if the clock or the touchpad are faulty:
SAFETY NOTE: Use caution when repairing or troubleshooting your Oven as high voltage is dangerous.
1 – Unplug or flip breaker and remove power to the oven.
2 – Access the back of the electronic range control “clock” or ERC.
3 – Unplug the touch pad ribbon connector from the electronic range control.
4 – Clear all so the Oven will not electrically short when power is regained.
5 – Replace any of the covers that were removed to access the electronic range control.
6 – Turn power back ON to the Oven.
7 – Watch for the F1 error code and listen for the beeping sound.
8 – If the error code F1 reappears and beeps then replace the ERC (electronic range control).
9 – If after 1 to 2 minutes after applying power back to the Oven, you DO NOT get the F1 error then replace the touch pad.
SIDE NOTE: Some Maytag Oven models have both the touch pad and the clock control as one part. This means the F1 error code indicates a faulty bad clock control.

Maytag Oven Parts To Fix Error Codes

Maytag Oven Error Code F2
Cause Of Problem: Oven is too hot
What To Replace/Clean/Check: Replace the relay board or the oven temperature sensor

Maytag Oven Error Code F3
Cause Of Problem: Open or short in the oven temperature sensor
What To Replace/Clean/Check: Replace the oven temperature sensor

Maytag Oven Error Code F4
Cause Of Problem: Open or short in the oven temperature sensor
What To Replace/Clean/Check: Replace the oven temperature sensor

Maytag Oven/Range with type C and D Clock Types:

Maytag Oven (With C and D Type Clocks) Error Code F1
Cause Of Problem: Relay enable shorted non-cook mode sounds alarm – requires removal of power until fixed
What To Replace/Clean/Check: Faulty touch pad or clock assembly (ERC)

Maytag Oven (With C and D Type Clocks) Error Code F2
Cause Of Problem: Bake/broil/clean temp runaway alarm – bake/broil/clean temp exceeds limits
What To Replace/Clean/Check: Stuck relay – check relay or replace.

Maytag Oven (With C and D Type Clocks) Error Code F3
Cause Of Problem: Open temp oven temperature sensor – sounds alarm and stops cook mode
What To Replace/Clean/Check: Replace the oven temperature sensor

Maytag Oven (With C and D Type Clocks) Error Code F4
Cause Of Problem: Open or short in oven temperature sensor – sounds alarm and stops cook mode
What To Replace/Clean/Check: Replace the oven temperature sensor

Maytag Oven (With C and D Type Clocks) Error Code F5
Cause Of Problem: Relay enable open cook mode – sounds alarm and resets control to non-cook mode
What To Replace/Clean/Check: Replace or repair electronic range control (ERC)

Maytag Oven (With C and D Type Clocks) Error Code F6
Cause Of Problem: Missing AC line cycle detector – displays code – no beep
What To Replace/Clean/Check: Unplug oven for 5 minutes to clear error

Maytag Oven (With C and D Type Clocks) Error Code F7
Cause Of Problem: Function key shorted – too hot at clock assembly – shorted touch pad or clock assembly
What To Replace/Clean/Check: Replace the touchpad or have check ERC

Maytag Oven (With C and D Type Clocks) Error Code F8
Cause Of Problem: Analog/Digital issue – sounds alarm to non cook mode
What To Replace/Clean/Check: Check ERC

Maytag Gemini Oven/Range Error Codes:

Maytag Gemini Oven Error Code F1-1
Cause Of Problem: Run Away Cook – Upper Oven
What To Replace/Clean/Check: Check oven temperature sensor and replace if needed

Maytag Gemini Oven Error Code F1-2
Cause Of Problem: Run Away Cook – Lower Oven
What To Replace/Clean/Check: Check oven temperature sensor and replace if needed

Maytag Gemini Oven Error Code F1-3
Cause Of Problem: Run Away Clean – Upper Oven
What To Replace/Clean/Check: Check oven temperature sensor and replace if needed

Maytag Gemini Oven Error Code F1-4
Cause Of Problem: Runaway Clean – Lower oven
What To Replace/Clean/Check: Check oven temperature sensor and replace if needed

Maytag Gemini Oven Error Code F1-5
Cause Of Problem: Keypad Cancel Issue – Upper Oven
What To Replace/Clean/Check: Check the keypad and replace if needed

Maytag Gemini Oven Error Code F1-6
Cause Of Problem: Keypad Cancel Issue – Lower Oven
What To Replace/Clean/Check: Check the keypad and replace if needed

Maytag Gemini Oven Error Code F1-7
Cause Of Problem: Keypad Is Disconnected
What To Replace/Clean/Check: Check the wiring harness between keypad and ERC

Maytag Gemini Oven Error Code F1-8
Cause Of Problem: Keypad Is Shorted Or Blown
What To Replace/Clean/Check: Be sure moisture is not getting into clock – replace keypad if needed

Maytag Gemini Oven Error Code F1-A
Cause Of Problem: Latch Switch – Upper Oven
What To Replace/Clean/Check: Check the door latch switch and replace if needed

Maytag Gemini Oven Error Code F1-B
Cause Of Problem: Latch Switch – Lower Oven
What To Replace/Clean/Check: Check the door latch switch and replace if needed

Maytag Gemini Oven Error Code F1-C
Cause Of Problem: Door Switch – Upper Oven
What To Replace/Clean/Check: Check the door switch and replace if needed

Maytag Gemini Oven Error Code F1-D
Cause Of Problem: Door Switch – Lower Oven
What To Replace/Clean/Check: Check the door switch and replace if needed

Maytag Gemini Oven Error Code F1-E
Cause Of Problem: EEPROM Control Error
What To Replace/Clean/Check: Repair Electronic Range Control

Maytag Gemini Oven Error Code F1-H
Cause Of Problem: EEPROM Read Control Error
What To Replace/Clean/Check: Repair Electronic Range Control

Maytag Gemini Oven Error Code F1-L
Cause Of Problem: Oven temperature sensor – Control issue
What To Replace/Clean/Check: Check the oven temperature sensor and replace if needed

Maytag Gemini Oven Error Code F3-2
Cause Of Problem: Oven temperature sensor – Lower oven
What To Replace/Clean/Check: Check the oven temperature sensor and replace if needed

Maytag Gemini Oven Error Code F3-1
Cause Of Problem: Oven temperature sensor – Upper oven
What To Replace/Clean/Check: Check the oven temperature sensor and replace if needed

Maytag Gemini Oven Error Code F9-1
Cause Of Problem: Latch Lock – Upper
What To Replace/Clean/Check: Check for something blocking or broken in door lock mechanism

Maytag Gemini Oven Error Code F9-2
Cause Of Problem: Latch Unlock – Upper
What To Replace/Clean/Check: Check for something blocking or broken in door lock mechanism

Maytag Gemini Oven Error Code F9-3
Cause Of Problem: Latch – Both – Upper
What To Replace/Clean/Check: Check for something blocking or broken in door lock mechanism

Maytag Gemini Oven Error Code F9-4
Cause Of Problem: Latch – Lock – Lower
What To Replace/Clean/Check: Check for something blocking or broken in door lock mechanism

Maytag Gemini Oven Error Code F9-5
Cause Of Problem: Latch Unlock – Lower
What To Replace/Clean/Check: Check for something blocking or broken in door lock mechanism

Maytag Gemini Oven Error Code F9-6
Cause Of Problem: Latch – Both – Lower
What To Replace/Clean/Check: Check for something blocking or broken in door lock mechanism

If you need any assistance troubleshooting your Maytag Oven, please leave your question below with the model number of your Maytag Oven and the exact error code that is displaying on the Oven’s display.

Maytag Oven Error Codes - Stove Range Fault Codes - Causes and Solutions (2024)

Error Codes For Most Maytag Ovens/Ranges/Stoves:

Maytag Oven/Range with type C and D Clock Types:

Maytag Gemini Oven/Range Error Codes:

You May Find These Related Articles Helpful...